Ethernet Doesn’t Have A Valid IP Configuration: Error Fixed

Have you encountered an error on your computer that says “Ethernet Doesn’t Have A Valid IP Configuration?” This error is one of the most common errors when your computer is connected to the router or modem via an ethernet cable. So, what does this error mean and how can we fix this?

There are many reasons why “Ethernet Doesn’t Have A Valid IP Configuration” occurs. It can be on your router and modem, on your internet connection, or it can also be on your device.

So, let me discuss it one by one so you will know how to deal with this kind of issue if in case it happened on your device.

What Does “Ethernet Doesn’t Have A Valid IP Configuration” Mean

The Ethernet Doesn’t Have A Valid IP Configuration error occurs on your computer while you are trying to access a website. It happens when the NIC (Network Interface Card) is unable to obtain a valid IP address from the DHCP server. A valid IP address is needed to make a connection between a local network (computer) and the router or modem to work on the internet.

That error message is usually a software related issue and can be fixed in many ways. But, what are the causes for it to occurs?

Why Does “Ethernet Doesn’t Have A Valid IP Configuration” Occur

There are many reasons why Ethernet Doesn’t Have A Valid IP Configuration error happens. However, we can categorize them into three: faulty hardware, faulty modem or router, and software and outdated drivers

  1. Faulty Hardware. This fault is usually on the port where you connect your ethernet cable. When this port is damaged, you will not be able to access the internet, unless you are connected via a wireless connection (WiFi).
  2. Faulty modem or router. If your router isn’t properly configured, you might get an Ethernet Doesn’t Have A Valid IP Configuration error. To fix it, you have to make changes on the router’s configuration settings. You may also reset your router to make it back to default.
  3. Software and Outdated Drivers. This fault covers the device network settings which can be fixed by few clicks on your mouse and keyboard. Sometimes, reinstalling the drivers is needed especially when you constantly updating your operating system.

Knowing these causes, we can say that the error is not that hard to fix. So, here are some of the methods we compiled to help you solve this particular internet issue.

“Ethernet Doesn’t Have A Valid IP Configuration” Error Fixed

The following methods will surely fix the “Ethernet Doesn’t Have A Valid IP Configuration” error. It includes the simplest to the advanced method that you can do on your own. I suggest you try the first before the following methods because your problem might just need a simple solution.

Method 1. Restart your System/Device

Restarting device is the very first solution you can do. Because sometimes, especially when the Fast startup is enabled, some settings cannot load properly from systems memory. To fix the issue, you need to disable the Fast Startup feature before restarting your PC.

To do that, follow the steps below.

Step 1. On your computer, right-click the battery icon and select Power Options.

Step 2. Then, click on “Choose what the power buttons do.”

Step 3. Click on “Change Settings that are Currently Not Available.”

Step 4. Next, uncheck the “Turn on fast startup” and click Save Changes.

Step 5. Exit System Settings and restart your computer.

If the first method does not work, proceed to the next one.

Method 2: Check the Cables and Reboot Router/Modem

Step 1. The first thing you need to do is to check the ethernet cable if it is properly connected to your device and router/modem. If not, unplug the cables from both of the devices and plug in again.  You also need to look for a possible damage on the cable or on the port of your computer and router.

Step 2. If the error still appears, reboot your router or modem.

Step 3. To reboot, turn off your router/modem and wait for approximately 5 minutes.

Step 4. After 5 minutes, turn back on your router/modem. You need to wait for another couple of minutes until the router is back to its steady mode.

Step 5. Connect your computer to the router and check if the problem has been fixed.

The error should be fixed by now. If the two methods are still not working, then, it’s time to do some tweaks on your network settings.

Method 3: Change Network Adapter Settings

Step 1. On your computer, right-click the internet icon that is located on the lower right corner of your screen. Click Open Network and Sharing Center

Step 2. Once the window opened, click on “Change Adapter Options.” It will open then connections you have on your device. Right-click on Ethernet and select Properties.

Step 3. Once the Ethernet Properties window appeared, select Internet Protocol Version 4 and click on Properties again.

Step 4. Select Obtain an IP address automatically and Obtain DNS server address automatically. Finally, click the OK button.

After following the steps, restart your browser and check if the error has gone. Do the next solution if needed.

Method 4: Update the Driver of Network Adapter

When you constantly update your system, this may cause for the other drivers to not function well on your computer. To update the driver for the network adapter:

Step 1. On your keyboard, hold Windows + X and select Device Manager.

Step 2. Scroll down and select Ethernet network adapters. Afterwards, right-click on it and click Update Driver Software.

Step 3. Next, choose how do you want to search for an updated driver software.

Step 4. If you found any updated software, proceed to update the driver for your Ethernet network adapter. Then, go to your browser again and try to access any website to see if there’s no error at all.

What if you have done all the four methods, but still nothing works? Do the last solution we provided here.

Method 5: Uninstall and Reinstall Network Adapter

Step 1. Go to your computer’s Device Manager.

Step 2. Next, click on Network Adapters.

Step 3. Then, right-click on the Ethernet you are using and click Uninstall. Do not hesitate to click the uninstall button because you can still get the driver for the network adapter you are using.

Step 4. Lastly, click the OK button.

To reinstall, go to the manufacturer’s website to download the network adapter driver. After downloading, install it on your computer.

In Conclusion

Those are the five methods you can do to fix “Ethernet Doesn’t Have A Valid IP Configuration” error. Applying them on your computer will help you easily deal with this kind of internet issue. You can try them one by one, from method 1 up to the method 5 for you to know where is really the problem.

If in case you encountered this kind of error, you can share with us what solution you did to fix it. Or, if you have questions and concerns regarding the methods above, you may leave them in the comment box below.

Quick Guide to Netgear router login reset

Do you want to find out how to access your Netgear router login reset? If yes, this article will provide you with a detailed guide and other necessary information that you should be aware of. 

Netgear is one of the most leading companies when it comes to networking hardware. Accordingly, they produce reliable router that complements with your internet or network provider. If you happen to own one, you might be wondering how to reset your login information. So, without further ado, let’s take a look at the steps to reset your router. 

Reset Netgear Router Login

There are many reasons as to why you would want to reset your login credentials. But primarily, you have probably forgotten your password and username. And the problem is, that is the only way you’ll be able to change your settings. Don’t freak out yet because there is still a way out. Follow the steps below to know how to reset your Netgear login

  1. First off, turn on your router and locate the Reset button. This is usually placed at the back portion of your device. 
  2. Next, use a paper clip, pen, or any pointy end that you can insert on the pinhole. Simply press and hold the button for about 10 to 15 seconds.
  3. After that, release the Reset button and your router will automatically reboot itself. 
  4. Wait until all the lights are turned on. 

After completing the process, your router has been completely reset or restored to its factory settings. You can now use the default login details to login to your account. 

Recommended: Download MX Player Pro APK for Free (Latest Version)

Conclusion

Honestly speaking, resetting your router login information does not need technical expertise. By following the above steps, you can restore your settings to factory default. 

If you still have questions or clarifications, you can leave a message at the box below. We’ll get back to you as soon as possible. – Admin

Download MX Player Pro APK for Free (Latest Version)

From this page, you can download MX Player Pro APK for free.

If you are looking for an excellent media player, then try MX Player. It has free and paid versions. I know many of you are looking for a pro version which will not cost you a lot. And that’s what I am giving you in this article. 

Please check my website at Aegis Wallet and follow me for more guides and tutorials.

Download MX Player Pro APK

If you are a fan of downloading APK files, or you have been doing this for a long time, for sure you already know the steps. So, just skip the steps and click the download link to get the app.

Downloading MX Player Pro on your smartphone is very easy. And in order for you to install this app, you need to allow installation from other sources.

If you are new to the APK world, don’t worry! Here’s the full guide for you. Get your Android phone and follow the steps while you are reading.

Let’s begin!

#1. The first thing you need to do is to make sure you enable Unknown Sources on your device. To do that, go to your device settings and find Device Administration.

#2. Under that option, find the Unknown Sources and enable it. Just click on the switcher to enabling/disabling. You can disable it once you are done installing.

#3. Then, go to this page and download the mx player pro apk.

#4. Once you have downloaded the file, click on it to start the installation. Installing will only take a few seconds.

#5. Then, click the Open button when the app has been installed. MX Player Pro will automatically launch on your screen.

For a faster download process, secure a stable connection. But the file is relatively small so I’m sure you will not have any issue when you download it.

Key Features of MX Player Pro

There are two main reasons why you should get the MX Playe Pro APK. Although the app itself has useful features, you will definitely want to use the premium version because:

  • It supports many subtitle formats. Watching movies and videos in other languages will be easy using MX Player Pro because there is an option for subtitles.
  • MX Player has hardware accelerators for your components. When you activate those accelerators, you will increase the quality of the video’s volume.
  • Free from annoying ads. getting a pro version of MX Player will surely free you from advertisement and pop-ups.

Conclusion

Getting MX Player Pro for free is possible. Thankfully, there are generous people who wanted to share this kind of privileges to everyone including you as my reader.

Feel free to use the comment box below if there is something you want to ask regarding the steps above. I will try to reach back to you and provide the best answer I can give.